Hotpoint Ultima WF860 Front Load Washer "wt960 spin" Questions

...wt960 washing machine noisy on spin This machine is very noisy on spin cycle. Any ideas? Many Thanks Bearings faulty or another fault this model suffers from is the concrete balance weight retaining ...

...wt960 comes up with test tryed the optons ans still not working Press the Start/Cancel button until all the console Led's Illuminate Press both Start/Cancel and On/Off buttons together until 'd off' ...

washing machine not spinning my hotpoint washing machine wt960 is not spinning!! ANY SUGESTIONS!! motor brushes may be worn out?

...wt960 ultima, very noisey when on spin Remove lower rear panel of washer, remove belt and spin drum by hand, if it is noisy or feels rough, then main drum bearings have failed. If no noise, then look ...

My Hotpoint WT960 is washing but not spinning. Any idea what's causing the problem? Have you checked the pump is clear? Check the hoses are clear, particularly if it is connected under the sink, via a

...wt960? Remove the lower rear panel of washer, remove drive belt and spin drum by hand, watch your fingers!!!. If it feels rough, or you can hear it rumbling or grating, then the bearigs have gone, ...

the conditioner drawer does not empty after wash cycle has finished - Hotpoint WT960 1600 spin Remove the drawer and clean the tray with a cotton bud if need be

hotpoint wt960 machine does not drain the water machine spins ok but not draining the water from machine Your drain pump is out. Usually attached to your motor and operates when the drain cycle is ...

...wt960 flashing error code F10 .will wash but stops at spin cycle flash F10 , was told could be pressure switch blocked Full manual can be downloaded from this link ...

...wt960 is very noisy on the spin cycles...is there a need for oiling or what else can I do..? It could have an imbalnce in the drum because the load is uneven, or your machine could be uneven on the ...