Hotpoint Ultima WF860 Front Load Washer "washing keeps clicking sound work" Questions

Ad

Question about Hoover Washing Machines

1 Answer

...keeps clicking then starts again at the spin cycle It sounds like the timer is bad. Try another cycle like delicate, or normal, or heavy duty. If everything works on another cycle then it is probably ...

Ad

Question about Kenmore Washing Machines

1 Answer

...washing machine that will not agitate. It sounds like it is trying to work but unless I hold down the knob on top it just keeps clicking. pop the top off the agitator,you will see 4 small plastic ...

Ad

Question about Kenmore Washing Machines

1 Answer

Clicking sound durring sluggesh spin cycle. Everthing else seams to work fine, but durring spin cycle there's a loud steady clicking sound from under tub. Almost as if there is "brake " is turning on ...

Keeps tripping power at 13minutes remaining, just before the spin cycle About 6 months ago my washing machine would trip the power just before the spin cycle. I would turn the safety switch back on ...

Question about Whirlpool Washing Machines

1 Answer

...WASHING MACHINE stopped in mid-cycle and is full of water. I can restart the cycle, but it stops at the same point every time. Will not drain nor complete cycle. If I turn it off, turn the dial to a ...

...keeps beeping at me when I push the start button This has happened a few times, but then ends up working after a little while. When I push the start button on my washing machine it beeps and make ...

Question about Kenmore Washing Machines

1 Answer

...clicking sound,every time the lid closes and opens the switch should click,also you can set the timer to spin,open the lid and stick a screw driver into the hole where the strike on the lid would go ...

My washer isn't going through the cycles like it should by itself it jus keeps on dumping water into the tub until u go change it over to where it starts to wash the clothes and then when it gets to ...

Question about Washing Machines

1 Answer

...washing machine detergent drawer and drum keeps filling with water If it fills up while just standing it is the filler valve , they are easy to replace You need to take the back off the machine and ...

...sound but there is no movement the belt is the problem. I read your reply below Guest. "SERVICE ENGINEER AT THIS AGE APPLIANCE BRUSHES WILL NEED REPLACING IF YOU PUT ON WASH CYCLE AFTER DRUM STOPS ...

Not finding what you are looking for?
Hotpoint Ultima WF860 Front Load Washer Logo

1,290 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...