Hotpoint Ultima WF860 Front Load Washer "door locked open" Questions

Ad

...open the door. Remove the door gasket retaining hoop by stretching apart the retaining spring at the bottom of the door opening. Gently peel the part of the door gasket near the door lock/latch ...

Ad

Question about Hotpoint Washing Machines

1 Answer

...open the door. Remove the door gasket retaining hoop by stretching apart the retaining spring at the bottom of the door opening. Gently peel the part of the door gasket near the door lock/latch ...

Ad

Question about Hotpoint Washing Machines

1 Answer

locked door door is locked and wont unlock. I have tried unplugging it and plugging it in again To open the door when locked. Start new wash cycle and the door will lock - unlock then lock again. when

Question about Hotpoint Washing Machines

1 Answer

...door is locked and won't open. Error code Washer door is locked and won't open. Error code F22 DOOR LOCK ERROR After 6 failed attempts to lock the door. Possible Causes/Procedure Door lock mechanism ...

open the door with the door lock light on and it opened. unplugged machine and the plugged it back Closed door selected the cycle pulled knob out light for door lock came on but didn't start tried

Question about Hotpoint Washing Machines

1 Answer

...door lock has locked with the door open , how do i get it to unlock ? There is a manual unlocking tab located at the bottom of the door lock and switch assembly. Disconnect power to the washer before ...

locked with the door open. Now I cannot get it to open. With the power off, push a screw driver or similar in the aperture of the door lock, and push it from side to side, this should release the door

Question about Whirlpool Washing Machines

1 Answer

...door is locked for more than 5 seconds. Possible Causes/Procedure -Door not opened during 3 consecutive cycles. 1. Open and close the door. 2. Verify CCU operation by running a Diagnostic Test or any ...

Question about Hotpoint Washing Machines

1 Answer

locked) conditions, a problem exists in the door lid lock. Replace the door lid lock. 5. If the Manual: Door Switch or Manual: Door Lid Lock in step 1 failed, then the machine/motor control has failed

Question about Hotpoint Washing Machines

1 Answer

...door is locked. The F30 error code (dU) will flash when the dispenser motor cannot be driven to its proper position. Door Unlock Error A Door Unlock Error occurs if the door cannot be unlocked. It ...

Not finding what you are looking for?
Hotpoint Ultima WF860 Front Load Washer Logo

1,290 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...