...balance. now will not drain or spin unplug it for about five minutes. If there is a auto balance sensor in there it could sense that still being out of balance. By unplug it, it will reset the
...balance sensor which detects out of balance loads then reverses the motor to re-balance and try again. If your washer is chunking along out of balance, perhaps the sensor is not operating properly. I ...
balance sensor. One of the things I have noticed is when the installers deliver and set up the washers, they get a little too rough and cause a dent in the rear panel of the washer. In the rear panel,
...sensor is defective. The first thing to do is checking floor level and putting the machine at balance as explained in the user manual also try distributing the load. If that does not work there are ...
...spin cycle , balance could be one of the the balancing mechanism failed and not running could be the balance sensor shutting down the spin cycle. You should start by checking the balance shocks
...are usually mounted on the shock.Remove the connector and re-crimp the wires so that you know there making a positve connection.Re try in spin ,if the problem remains ,replace off balance ...
many clothes inserted), 2. can't balance the load within a few balance cycles, 3. has a damaged balance sensor, 4. isn't regulated properly (vibrates abnormally). IMHO you just overloaded the washer :
Question about LG Washing Machines
does anyone have any ideas? balance sensor defective.http://www.appliancepartspros.com/Appliance-Parts/lg-sensor-assembly-item-number-ap4440678.aspx . some time it is stator or its sensor problem
Question about Washing Machines
When washer load is out of balance it will not slow or stop When washer load is out of balance it will not slow down so it bounds around the wash room. Where are the balance sensors? ...
1,290 questions posted
Usually answered in minutes!
666 Questions
541 Questions
485 Questions
500 Questions
151 Questions