Hotpoint Aquarius WF000 Front Load Washer "stop washing machine jumping around" Questions

washing machines are often caused by the simple things such as incorrect loading, when you purchased your machine it would have given you a load capacaty, for this machine i think it is quit large but

around the lid and the lip, if I knew which machine it was I could instruct you to by pass it. If it is a whirlpool or roper it can be jumped under the control panel at the plug on the lid switch side

...washing machine want go on the spin cycle check your lid switch, its there for your safety so machine stops when you open the lid on spin cycle,you can temporarily jump(bypass) it with a wire be ...

around 10 seconds??? Is this dangerous please? Also it washes ok, spins and stops but the noise is very bad and the drum seems to make the machine jump out every so often. I'd be grateful for any help

...stop/pause" button to get it to resume, then it usually completes the cycle. I already jumped the lid switch wires to make sure it wasn't related to the lid switch. Your timer is sticking. You ...

...machine is a Series 11. ??Washer has stopped at 26 min with water in the drum. Will not spin or drain. Just sounds like it starts running then stops and repeats.?? I believe this is the start of a ...

...washing machine. You'd have to get a repairman to come out and fix it. Its probably easy to fix, but may cost a lot just to get a repairman come out to your home. You can try putting a rubber stopper ...

Amana top load washer NTW4600YQ0 Jumps around when going into rinse cycle, and must be stopped . just changed out suspension kit 2months ago, now it is doing it again try re sitting the feet that ...

...machine all the time to stop it from going into cupboards. Only had machine since April and it didn't do it to start off Chech the shocks, and springs. Also chech the counterweights bolted to the ...

...nails. Everything is level and I don't know what eles to do. How can I get it to stop the washer is brand new from sears. make sure that the shipping bolts on the rear of the machine have been ...