Hotpoint Aquarius WF000 Front Load Washer "hot point spinning" Questions

...hot point washer won't spin. The motor works My hot point washer won't spin. The motor works and I have a new timer. There is an inline fuse on wrapped in the wiring harness that runs from the ...

...Hot Point (GE). I did warranty repairs for GE for 8 years. During that time, GE had me condemn on average 6 washers a week due to bad transmissions. Reason being, it was cheaper for them to send the ...

...hot point washer. That's washing ok spins ok some times. But once machines been turned off and I come to do another load. The machine is full of wTer why??? Maybe the cold/hot water inlet valve has a ...

...Washer works fine on spin filling up but it won't agitate i tried to rest the motor like hot point say to but still nothing i replaced the agitator coupling air bell seems to be ok now cross my ...

I HAVE A HOT POINT TOP LOAD WASHER 2 SPEED 6 CYCLE EVERYTHING WORKS EXCEPT THE SPIN CYCLE IT WILL NOT SPIN OR REMOVE THE WATER. I CHECKED THE BELT IT IS INTACT. IT SEEMS LIKE THE SAFTY SWITCH IS BAD

Hot point WD440 wash/dry :How to put tumble spin off. Hi Many thanks in advance. I recent bought Hot Point WD440. when i did the first wash, set to fast wash. I was shocked to see such noisy and ...

...hot point digital washing machine works fine during the wash. Although there is a slight noise but nothing unbearable. Compared to the awful noise it makes when spinning. Pls help I'm desperate Xx ...

htwp1---mww top load won't drain or spin htwp1---mww top load won't drain or spin Lidswitch is what I would say Based on your model number posted.The liswitch has 2 wires. a green safety ...

...hot to touch at this point and once it cools down the unit will restart and then fail again shortly after it starts to spin again. Any thoughts? Machine is about 14 years old and this is the first ...

hot point washer wont spin i dont know how to hot point washer wont spin i dont know how to open the lid so i can see what the problem is There may be two screws in the top ... if your filter is on ...