Hotpoint Aquarius WF000 Front Load Washer "hole bottom door rubber" Questions

Ad

Question about Hotpoint Washing Machines

1 Answer

...hole in the boot seal,the rubber piece in between the door and the tub,also open the door and wipe the bottom part of the door on the plastic window,i've found pieces of hair there and the water ...

Ad

...from the door, You need to fit a new door seal Straightforward job once you bought the part Check the rubber bellows before fitting as there may be small drain hole or slot which goes to the ...

Ad

Question about Miele Washing Machines

1 Answer

...such that the missing piece is at the top? Or can I replace the rubber altogther? not really due to therebeing 3 holes at the bottom of the door seal which lets water out that is stuck in the ...

Question about Malber Washing Machines

1 Answer

...replace the entire rubber piece. If you mean in the bottom of the gasket between the drum and the door the hole is to allow water to drain from the gasket to prevent standing water which will smell

...bottom of the door I thought I didn't close the door at first but tried it again and it starts gushing water from the bottom of the door after the cycle begins, not during the filling time. Please ...

Question about Hotpoint Washing Machines

1 Answer

...bottom part of the door,i've seen pieces of hair on the door and water leaks down the pieces of hair through the door,if that's clean then check for a hole in the rubber boot seal,most likely there's ...

Question about AEG Washing Machines

1 Answer

...hole in the rubber boot seal and need to change it,also i've seen a buildup of detergent and hair stuck on the bottom side of the front door,when the door is closed the water was traveling down the ...

Question about Hotpoint Washing Machines

1 Answer

...the rubber gasket to see if there is any forign matter or rips, and check the small drain hole on the inside bottom of gasket, if there is a tear you could repair with a bicycle innertube repair ...

Question about Hotpoint Washing Machines

1 Answer

...hole in the lower bottom of the seal to let small portions of water drain out. If you DO NOT have this small hole, you need to replace the rubber boot with one that has a hole. NOW, WORD TO THE WISE ...

Question about Hotpoint Washing Machines

1 Answer

bottom of the door and water leaks out but pull open the rubber boot and run your fingers all around it to check for any holes.you can remove the bottom panel and then run the machine to see where the

Not finding what you are looking for?
Hotpoint Aquarius WF000 Front Load Washer Logo

705 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...