The top off Hotpoint WMA35 washing machine? I have a Hotpoint WMA35 washing machine. Start button is stuck in. How do I take the top off to look inside, please? Located at the front end of the top ...
how do i change the brushes on my wma35 hotpoint washing machine so that it'll spin? unplug first then remove top cover motor should be there remove motor 2 bolts then u can change brushes how do you ...
wheres the filter on the wma35 The filter is located at the rear of the washer. Remove lower rear cover, remove large black hose on bottom of drum. Remove and clean plastic filter inside the hose. Fit
Cleaning my machine I have recently dyed some clothes in my hotpoint washingmacine wma35 the dye has stained the rubber seal between the metel drum and the door and has left resdue in all the creases.
Hotpoint WMA35 Hi, My WMA35 which is 5 to 6 yrs old has stopped spinning and there are sparkes comming from the bottom of the machine, about a week ago I noticed that it had not spun properly and was ...
Question about Hotpoint Washing Machines
i have only bcold water feed but washer has hot/cold do i need 2 the washer is a hotpoint wma35 If it is a hot and cold fill m/c, what you need is a fitting that is referred to as a" Y" piece..To fit ...
HOTPOINT WMA35 WASHER How do i do a hard reset? remove it from power plug it off from 24 hours and then use it again
My Hotpoint WMA35 leaks water internally into the drum when the machine is not in use ? The inlet water solenoid valve is faulty and must be replaced. usually it's right under the top cover where the ...
...impellor by hand )is that normal or should it turn easily .it works fine but very noisy hotpoint wma35 The clicking sound you refer to is normal, but a noisy pump indicates a worn pump, so I would ...
60 questions posted
Usually answered in minutes!
886 Questions
666 Questions
541 Questions
485 Questions
500 Questions
