Hotpoint WM56 Front Load Washer "soap prewash" Questions

...dispenser water does not wash out the soap from the main dispenser. I use the prewash dispenser ok If you use a program without prewash, the machine will not flush the prewash chamber in the

...else could it be? ur using a big amount of soap if ur using a prewash apply half a cup in the prewash drawer and 3/4 in the second and if ur not using a prewash just put 3/4 of a soap cup as a ...

...soap dispenser" deal and results were the same. Exploratory surgery revealed that the Prewash hose (for lack of better term), which connects from the top of the drum housing to the right side of the ...

...soap in? put on prewash cycle. note which tray water enters and that is the prewash tray. put on wash cycle which has no prewash. note which tray water enters and that is main wash tray. remaining ...

...prewash. I am also looking for a shop manual to download. hi you need to replace the inlet valve,take off the top panel and you will see the valve behind the soap drawer with the black hoses.you can ...

...prewash soil remover. You may have build up of old soap remaining. Add white vinegar to every load to dissolve old soap build up. Basically you are getting sudsing and shouldn't be. Also have you ...

soap Where do you put it??? As you look at the despenser drawer it has 3 chambers. The left chamber is for Prewash detergent, middle for Fabric conditioner, right is for Liquid or powder detergent. Or

soap drawer is not blocked its the cover of the conditioner compartment.see if the programme will run on a prog with pre wash suspect not as prewash valve faulty. uses both valves to empty conditioner

...soap channel during prewash. How and where do I put this back? The two halves separate easily with any pressure and drop their spring. I don't know if there are yet further parts that it attaches to ...