Hotpoint WD62 Front Load Washer / Dryer "drum disconected washing machine" Questions

...machine to 45 deg to one side under the drum there is a black ribbed elbow pipe leading to the pump, disconect it and check for obstructions, mine had a sock stuck in the hole. if not try the pipe ...

...disconected all the wires, pipes etc. All I need to do now is get the drum out of the case. I need to free the drum from the suspension legs and the two springs at the top but cannot seem to do it. I ...

...machine washes ok but will not spin clothes are still wet.when drum is turning in wash mode there is a strange noise like electric sparking. Could the brushes need changing and is this a diy job. ...

Drum wont turn Our washing machine has been noisy for ages and now the drum seems to be jammed. If i start a program it starts to fill with water and tries to turn but sticks as if its being jammed by

...you know its the bearing.if not with the belt removed go to the front and open the door spin the drum fast, if it makes the same noise its the rear bearing. Mine was really loud until we

...machine tilted forward by placing a tin of soup or something under it. Put a bowl or deep dish under the sump(the black hose connected to the under side of the drum)to catch any water that will come ...

Drum disconected from washer The drum of my washing machine disconnected from the unit. It dropped about and inch and is not longer connected to anything. How can this be fixed. I can not even figure ...

drum is WAY off center, and can be moved around by hand. Obviously, our clothese are very wet when we are done. Also, two more things, one, this is strange, but our washing machine stinks! No idea why

...drum lining stuff (seal) is attached to the door, so thats a big pain also, do you know what i should do?.... short of pulling all of my hair out of course! well if you can help i would realllllllly ...

washing machine? I have managed to take off the belt fromt he motor and the drum, but trying to get the replacement band back on it very hard - if it just sheer force - or should i disconect the motor