Hotpoint Ultima WD72 Front Load Washer/Dryer "fabric conditioner stays draw" Questions

...fabric conditioner, it works on a cross over water inlet. You have a cold main wash valve which dispenses water to the powder section and a cold rinse valve that dispenses water to the rinse section ...

...fabric conditioner it just stays in the tray what's wrong with it? Hi my washer will not take the fabric conditioner it just stays in the tray what's wrong with it? You will need to clean ...

...fabric conditioner remains in the dispenser and does not get used. Could be a blockage in the dispenser compartment. If it has a tray or plastic post remove it and you should see the hole in the post ...

...fabric conditioner is not taken up by the machine -it stays in the tray? I have cleaned the tray in side and outside. Done a service wash at a high temperature with biological washing powder. The ...

Fabric conditioner not being emptied I have a Hoover Aquarious. The problem is that the fabric conditioner does not get released into the machine and stays in the compartment drawer, I've tried giving

Fabric conditioner stays in the dispenser tray At the end of the wash cycle the fabric conditioner is still in the dispenser tray of my Hotpoint WF000. I have cleaned the tray and parts leading to it ...

fabric conditioner staying in draw take drawer out and clean well

...but the fabric conditioner stays in the draw and doesn't rinse through the clothes, any ideas???? make sure you have both water valves working and check your water pressure is good too hope this ...

...fabric softener dispenser seems to work on syphoning. I'd say its working, in that during the rinse, water enters the drawer and forces out the conditioner, but when the water cuts off, anything left ...

fabric conditioner not going down Fabric conditioner does not always go down Sometimes mixes with water and stays in dispenser, sometimes all that is left is water Is this a front loader with a top ...