Hotpoint Ultima WD72 Front Load Washer/Dryer "clasp" Questions

...door seal with a new one Thanks un-plug the washer take the lid off now open the door undue the clasp that goes around the rim of the door seal on the outside of the washer (look carefully) once ...

where does the spring loaded clasp go when replacing the bellow on a kenmore front loader around the trim on face on panel The spring loaded clasp is called the front bellow clamp. The following link ...

...the same problem. Machine would freeze on drain / spin cycle. Filter had caught 4 coins but a hair clasp had got past the filter. When all coins and clasp removed machine all back and working. Very ...

noisy drum and some sort of oil all over the washing sound like the bearings have clasped and grease is leaking into your washinbg

...IN THE BROAD PART OF THE ARROW TO MAKE IT JUST A LITTLE BIT WIDER THIS SHOULD WORK PROVIDED THE CLASP PART IS NOT

...Washer Machine. How do I do this ? Do I need to remove the drum or can I access the internal clasp another way ? You should be able to access the back of the hinge via the top of the machine ...

...come away from the drum or the door frame? Have alook around the seal itself it should have a metal clasp with a spring in the middle and this should go all around the seal holding it to the door ...

My fisher and payjel washing machine is making a strange nouse when it is on the wash cycle It is making a clicking noise on the wash and rinse cycles Might have something caught in by the edge of the

HOw do you replace the door seal? Is it relatively eassy round the door seal there is a wire clasp if you gently prize this off by first finding the spring section then using pliers or screw driver be

dial not turning I have replaced the cold water inlet vlave so water is now coming in However the dial / cycle does not turn automatically We have to manually click through each sequence? If you ...