Hotpoint Ultima WD72 Front Load Washer/Dryer "check pump" Questions

Question about Hotpoint Washing Machines

The washer stops at 39 minutes on a regular wash cycle and the code OE is displayed

Check pump filter is clear and there are no obstructions Check the drain hose for obstruction Check the drain hose is not kinked Check the drain pump filter and clean if required Check the air chamber

Question about Washing Machines

1 Answer

Waq283s1gb/09 showing fault e18 ?????? Tks

...Check drain pump filter Check drain pump for blockage or restriction Check outlet hose for blockage or obstruction Check drain pump operation Check drain pump wiring If there was no blockage in the ...

Question about Fisher and Paykel Washing Machines

1 Answer

Fisher and Paykel GWL11 washer not going into rinse cycle, getting error code 37

...Check the pump harness is connected correctly to the pump. 2) Check continuity of the pump harness. Tertiary Source: Motor Control Module. Action: Activate the pump by operating the machine in spin ...

Question about Kenmore Washing Machines

1 Answer

Model 82781800 pump

...Check if pump is making noise, if so check for blockages in all hoses & pump. Check lid switch. If no noise check if pump is seized (Bearings seized or blocked & locked up). Check with multi ...

Question about Fisher and Paykel Washing Machines

1 Answer

Continuous beep with no drainage

...Check the pump harness is connected correctly to the pump. 2) Check continuity of the pump harness. Tertiary Source: Motor Control Module module. Action: Activate the pump by operating the machine in ...

Question about Fisher and Paykel Washing Machines

1 Answer

Fault 37

Question about Fisher Washing Machines

1 Answer

I w 812

Check the pump harness is connected correctly to the pump. 2) Check continuity of the pump harness. Motor Control Module module. Activate the pump by operating the machine in spin mode. Check the pump