...brick on the inside of the washer that also may come out of balance-is this true? And how do I fix it? Leveling a washer can be a pain sometimes. 1. You must have a solid foundation. The floor where ...
Question about Hotpoint Washing Machines
...brick dust - would new springs fix this problem or is it something else? please help! It could be a broken drum restraint spring, or a worn or broken. or loose shock absorber. To check the springs, ...
Question about Hotpoint Washing Machines
...are behind these, remove them and then pull the lid forward and up. The weight is obvious, it looks like an odd shaped brick and is bolted down with three bolts. In my case the front one was
Question about Frigidaire Washing Machines
front load washer loud noise and drum loose but not dropped New Year's Eve Frigidaire front load went into spin cycle and suddenly sounded like it was spinning BRICKS..was so loud it was scary...I ...
brick had loose bolts. When I tightened them up, I had no more problems These machines have a common fault. If yours has no visible filter, the filter is in the rubber waste tube, just below the drum.
...plumbing also. brick dust glenn? the weight is loose and needs to be tightened carefully. if it's been doing that for a while the plastic drum studs may be worn away which will mean renewing . ...
...brick & mortar parts depot's as well as on-line vendor's. You`ll need to remove the top of the agitator to replace them. To remove the top cover of the agitator, it should lift off by prying up ...
...brick & mortar parts depot's as well as on-line vendor's such as "repairclinic.com" or "searspartsdirect.com" to name a couple. You`ll need to remove the top of the agitator to replace ...
Leaking on the floor for several months Hi, We have been using this Frigidaire washing machine Model Gallery front load for seven years. Now at each wash there was water leaking on the floor and it is
Question about Frigidaire Washing Machines
loose, push it all the way in until it cannot be pulled out with a slight tug ( there are clasp's on the connector but I suspect sometimes they aren't secure when leaving the factory...just my
65 questions posted
Usually answered in minutes!
886 Questions
666 Questions
541 Questions
485 Questions
500 Questions
