Hotpoint Aquarius WD640 Front Load Washer/Dryer "whirlpool spin lock flashing" Questions

...whirlpool low h20 washer that will not agitate or spin. I did check the belt it's fine. The lid lock flashes after trying to spin. Lid lock could be defective check under agitator for bad splines or ...

Whirlpool cabrio top load washer Have replaced the shift actuator and the shaft pulley It will agitate but not spin. The machine will stop at the spin cycle with lid lock flashing. The control board ...

...Whirlpool WTW4950XW Washer won't go past the sensing cycle. It starts to spin to sense the load, then the lock flashes and unlocks. Starts to spin again to sense but stops and the lock light ...

whirlpool awo 3751/5 will not spin machine is set for spin, door is locked, push start button and pump activates and drains residual water for approx 20 seconds, machine then stops and will do no more

...spin lights both flashing. Have tried pushing sta Whirlpool Cabrio toploading washer, lid is locked and won't open. Time remaining is flashing 1 minute. Lid lock light is flashing and start ...

My Whirlpool Cabrio washer has it's lid lock light flashing while the door is actually locked and it does not spin out the clothes. Check the door safety switch.

whirlpool cabrio top load washer. I did have a problem with the spin, but I fixed that problem. Now it won't start it's cycle; once it senses the load the lock lid light flashes and it does nothing...

...not spin then odds are the actuator is not shifting it from wash to spin or the main board is sending the signal to the actuator to tell it to shift. My top load Whirlpool washer won spin how do fix ...

spin light is flashing 1min left in cycle door spin light is flashing 1min left in cycle door remains locked after many minutes tried trouble shooting suggestions unplugged machine still can't open ...

...Whirlpool washer. When I press the start button the sensing light and lid lock lights turn on. Then after a few seconds the lid lock light goes off and the sensing light stays flashing. I ...