Hotpoint Aquarius WD640 Front Load Washer/Dryer "washing machine wd440 lights" Questions

Ad

Question about Hotpoint Washing Machines

2 Answers

...up.Then press and hold the on/off button and the start /cancel button together.You will now reset the washing machine settings.And just pick your cycle again hello mam please check the timer

Ad

Question about Washing Machines

1 Answer

...WD440 will not turn on, no lights are coming on when it's plugged in. The fuse in the plug is fine, the plug socket is fine. I have tried turning the machine on with the door open, and with the door ...

Ad

Question about Hotpoint Washing Machines

1 Answer

...WD440 has flashing lights and won't run Mt Hotpoint WD440 washer dryer will not fill with water and the on/off button and time saver option button are flashing. The only way to stop it is to switch ...

washing machine stopped half way through spin,wash,rinse and spin,rinse hold and time saver lights are on but nothing else is happening at all It may be an electronic issue.  To reset, unplug the

Question about Hotpoint Washing Machines

2 Answers

machine stops also, please let me know what it is. Thanks and I hope I can FixYa. Mike hotpoint Wd440. I had the same problem, lights flashing and water not draining, First drain your water (syphoning

...washing and rinsing but as soon as fast spin comes on machine cuts out and on/off button and rinse hold lights flash. Machine us draining ok and I cleaned the filter check if the motor bearings are ...

Question about Hotpoint Washing Machines

1 Answer

...answers would be greatly appreciated.also is there a filter in this machine.wd440,Aquarius. Thanks. the filter is inside the sump hose you need to remove hose/need to clarify which lights ...

Question about Hotpoint Washing Machines

2 Answers

...machine should be back to normal. this is same for both posts I guess. The WD440 problem of flashing lights etc was solved by replacing the control unit, and this could only by done by a Hotpoint ...

Question about Hotpoint Washing Machines

1 Answer

...washing machine doesn't seem to hold the water and just drains out as its filling. Make sure that the outlet of the pipe is at least as high above the floor as the top of the machine. If it is ...

Question about Hotpoint Washing Machines

7 Answers

...WD440 washer/dryer machine has recently starting stopping mid-cycle with the Rinse Hold light flashing along with the On/Off light flashing. This is just before it takes in the conditioner and leaves ...

Not finding what you are looking for?
Hotpoint Aquarius WD640 Front Load Washer/Dryer Logo

907 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...