Hotpoint Aquarius WD640 Front Load Washer/Dryer "ge 1 error" Questions

GE Profile Harmony 1 press power ( to wake up washer) 2 press Home ( it may already show HOME) 3 press HELP 4 press and hold MY CYCLES and BACK (for 3 to 5 seconds) the service mode diagnostics screen

GE Profile Harmony 1 press power ( to wake up washer) 2 press Home ( it may already show HOME) 3 press HELP 4 press and hold MY CYCLES and BACK (for 3 to 5 seconds) the service mode diagnostics screen

...GE Answer Center® 1-800-626-2005 Monday - Friday: 8 a.m. - 10 p.m. ET Saturday: 8 a.m. - 7 p.m. ET Closed Sunday. GE Warranty Management 1-800-626-2224 Monday - Friday: 8 a.m. - 8 p.m. ET Saturday: 8 ...

...ge profile washer and I get an e4 error code Hello Lisa; My name is Peter. I am a retired field service appliance technician. You did not provide any information so I have to be general. 1.) I assume ...

1/2 years old. So far I have had 2 of them give me an error code of "Lo" This code is not in the manuel. The Sears repair guys have no clue what it is. On says its the lid switch, and another says its

...back in and then lift and close the lid 11 times within 15 seconds and finally pull the knob to start the washer on spin cycle. This should clear the error code. GE service 1-800-626-2000 (option

...1 second intervals, no error codes. I checked the lid switch, fuse, and wiring and all seems fine. Motor and drum turns freely. I tried to put it in service mode to read lights, but it would not go ...

...GE, Kenmore, LG, Maytag, Samsung, and Whirlpool. This list might not be complete and should be used for reference only. Asko Washer Error Codes • F1--Water supply/low water fill. o 1. Check water ...

...GE front load washer. 1. Close the door. 2. Clear current cycles by pressing the power button. Make sure the screen is blank before attempting to enter the service mode. 3. Disconnect power to washer ...

GE PROFILE WASHER M# WPGT9350COPL MY WASHER STOPPED DURNING A SPIN CYCLE..THE PUMP IS WORKING BUT IT WILL NOT SPIN.. I CAN HEAR IT MAKE NOICE THEN CLICK OFF WITH AN ERROR MESSAGE THAT SAYS IT HAS ...