Hotpoint Aquarius WD640 Front Load Washer/Dryer "element test" Questions

Ad

Question about Hotpoint Washing Machines

1 Answer

...know if the element is bad. You need to search and test all the controlling items that allow the element to heat before condemning it. I believe you need a skilled service person. Goodluck, ...

Ad

Question about Hotpoint Washing Machines

2 Answers

...element off a dryer how do you test a heating elent to see if its bad connect a tester to both wires on the bottom of element ,if good it should have a reading.if using a test light ,power should be ...

Ad

Question about Hotpoint Washing Machines

2 Answers

...test a dryer's heating element. How to replace a dryer heating element. Find a heating element for your clothes dryer. Thermal Fuse Another possible cause for a dryer not heating up could be ...

Question about Kenmore Washing Machines

1 Answer

...test a dryer's heating element. How to replace a dryer heating element. Find a heating element for your clothes dryer. Thermal Fuse Another possible cause for a dryer not heating up could be ...

Question about Whirlpool Washing Machines

1 Answer

...test a dryer's heating element. How to replace a dryer heating element. Find a heating element for your clothes dryer. Thermal Fuse Another possible cause for a dryer not heating up could be ...

...test heater element on hotpoint ultima tdc60 therostats are ok but dryer wont heat Remove the wiring from the element and use a multimeter to test for continueity, no continueity means there is a ...

test with a multimeter between the element and the outer sheath which should show 0 if Faulty and replace the element, otherwise it is something else in the circuit i.e. temperature cutout causing the

...or the motor or the motor capacitor. Start by pulling both the element wires off then test. If still tripping, disconnect the motor wires.(trial and error assuming no testing equiptment

Question about Hotpoint Washing Machines

2 Answers

...the machine on its side as you can get at things from the back AND the bottom! If you wish, you can get a test meter, remove one connection and check the element for continuity before you remove ...

...Element test good. No visible breaks. Tested the Thermal fuse it was bad so we replaced it. The dryer worked about 5 minutes. So we tested everything again and the Thermal Fuse and Thermistor tested ...

Not finding what you are looking for?
Hotpoint Aquarius WD640 Front Load Washer/Dryer Logo

907 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...