...5 5 wd 440 not draining/ spinning what do i do? If not spinning, first check brushes on motor. If not pumping check filter (panel on front opens and front of filter unscrews and pulls out?) and pump ...
...wd 440 i have cleaned and replaced filter problem still exists with lights on front panel still flashing etc.Any ideas ????? Hi mate the problem you have is cause by a short in the motor which has ...
...WD 440 wont open, the machins works ok, it's just the door. I was wondering if you had any tips to help us with that, or could you tell me how much it would cost me to get it repair? thanks a lot. -A ...
...WD 440 Washing machine worked fine yesterday but today is tripping out and blowing everything in the house. Also washing inside the machine was very hot and water not drained so obviously nblew mid ...
...wd 440 hotpoint that was on a dry cycle last night and filled with water. when it spins water comes out of the soap drawer. now it wont pump out at all and has 3 inches water in the bottom help you ...
Question about Hotpoint Washing Machines
...wd 440 two years old tripping main board Hi, This washer trips the house main board when a program is selected, it does not trip when just the washer on off switch is pressed lighting up the washer ...
...wd 440 washer dryer does not wash hoy and also does not heat up in drying mode all other functions seem to operate, this leads me to believe its the heater element or part of. Im not sure where this ...
...WD 440 The machine makes a very loud banging noise when spinning on final rinse/spin. The transit bolts have been removed and the machine is on an even surface. What now? FIRST OF ALL THE PERSON WHO ...
Question about Hotpoint Washing Machines
...WD 440 is not taking water in. Can this be due to the filter? It is starting as normal.. Then it stops after the first rotation.. No blink of lights. it can be. what is the washer doing right ...
589 questions posted
Usually answered in minutes!
886 Questions
666 Questions
541 Questions
500 Questions
151 Questions