Hotpoint Aquarius WD63 Front Load Washer/Dryer "washing machine wt540" Questions

wt540 - it has started to malfunction - the programme begins and machine fills but then all the lights on the left hand side of the control panel start flashing. This happens on all wash settings - it

...washing machine. will not fill with water Hotpoint Aquarius WT540 washing machine. Machine starts normally but then cuts off the water supply stopping the drum from filling so the wash does not ...

...wt540 where can I get the board that sits behind the front panel and has the start switch on it. The external button pushes right in but the machine does not start. Power button light is on. ebay or ...

...wt540, reduced creases and extra rinse lights are staying on all the time light 2 and 5 staying on even when the machine is turned off. 1) clean the contacts ribbon with erase pencil and put a little ...

wt540 please someone tell me how to access the carbon brushes on the wt540 thank you how-2-repair.com i found this web site for you

WT540 1400 Spin. How do you split the outer plastic drum casing allowing a bearing replacement. There are no screws around the drum but rather 4 plastic tabs. I cannot seem to separate the 2 halves of

Hotpoint Wt540 1400 wont spin check the machine washes ok if it does not turn the drum on wash check the motor brushes if drum action is ok on wash check the drain pump for blockages

...and wont drain the water and spin. this has happend to my washing machine could u please tell me how to unblock the pump my washing machine has done the same and my pump was blocked. hope this

machine wont spin my machine for some reason wont spin on wash or dry. I can hear a click as if its trying to start but nothing happens. check motor brushes or blocked pressure chamber.

wt540 washer and it is sticking in wash mode now. i put some washing on this morning and it was still washing in wash mode when i got home about 8 hours later bad timer or remotely possible bad wiring