Hotpoint Aquarius WD63 Front Load Washer/Dryer "bearing set" Questions

Ad

Question about Hotpoint Washing Machines

1 Answer

...set. If the pn is not available if I knew the bearings outside diameter, inside diameter and width. Also if they are ball bearings or roller bearings. Machine model is Hotpoint Aquarius WF 340 ...

Ad

Question about Maytag Washing Machines

1 Answer

...bearing, 1 rubber tub seal, 1 thrust washer, 1 aluminum spacer, 1 set of instructions--check it carefully--if **anything** is missing, take it back and get another. You will also HAVE to have a ...

Ad

Question about Zanussi Washing Machines

2 Answers

bearing seal and a drum gasket as the drum has to come apart. Tools are a digital camera ,socket set, torx key set, set of spanners a cold chisel and a hammer. And you need the old bearings to put the

Question about Hotpoint Washing Machines

2 Answers

cycle. Bearings will go bad from natural wear and tear. 5-7 years need to replace them. always repalce as a set, large and small bearing and new seal. dont for get to pack the new bearings will grease

Question about Hotpoint Washing Machines

1 Answer

...otherwise, it works great Ball bearings have worn out. Replace as a set. Replace Water seals in the drum. Check the bearing shaft for any scrub marks. Check bearing housing. Fix new bearings ...

Question about Kenmore Washing Machines

1 Answer

...bearing/seal set from local supplier. got back off machine, removed pulley for belt. Not sure now whether to remove drum assembly completely or to split outer drum all way around middle and remove ...

Question about Washing Machines

1 Answer

...Bearing) for it and if so how mutch plz? Hi just read your posting.Now how old is this Simpson.When I have replaced bearings in the EZI SET range of washing machines I always have to change both ...

Question about Hotpoint Washing Machines

1 Answer

...the drum and pull from the front. You have to change the full set of Bearings with same type and design. Check the bearing housing and the shaft before fixing new ones! Replace the water seals if ...

Question about Hoover Washing Machines

1 Answer

...with diesel/kerosene and apply light oil , turn the bearing to hear a smooth noise .If so you can set it back with some light grease. If there is roughness on the bearing , it will good to

Question about Hotpoint Washing Machines

1 Answer

...It need a complete new spider frame and bearing set as the front bearing had collapsed and groved the bearing spindle. Open the door and try lifting the drum to see if there is any up/down

Not finding what you are looking for?
Hotpoint Aquarius WD63 Front Load Washer/Dryer Logo

589 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...