...WD420 trips the power to all the socckets in my house whenever I try to start the machine up. You have a fault on the machine which is a dead short or an earth leakage. Neither can be sorted out ...
hotpoint wd420 not pumping my hotpoint wd420 starts fine and fills with water but it just runs the same part of the programme all the time plus the water will no longer pump out i have taken the pump ...
Question about Hotpoint Washing Machines
Hotpoint wd420 shows error code f13 after replacing heater element for dryer. I have bought used wd420 washer dryer. After few days the dryer heating element broke and it was tripping my short circuit
wd420 cannot stretch drive belt on there is no slide bar on motor which is fixed solid even after bolts are lossened its a washer drier no obvious way of attaching belt There is no adjustment provided
WD420. The machine first started playing up by not pumping out properly, and aborting mid cycle qith an error code, after the first pump out. I removed the filter / float ball assembly and cleaned out
Question about Hotpoint Washing Machines
...WD420 machine has started to make a terrible noise during the spin cycle. At first I was convinced that a fork had been put in with the wash by accident because the sound was like a metal on metal ...
Hotpoint Aquarius WD420 5+5Kg Starts wash cycle, water fills, drum rotates, starts 2nd water fill - lights 1 (Dryer high heat), light 3 (rinse hold) and light (on/off) flash repeatedly and machine ...
how to reset wd420 1200 spin press and hold the start/reset button until all lights come on about 20 secs
Question about Hotpoint Washing Machines
Ref WD420, select program, press start button, all lights on top panel come on then go out and nothing happens **** the red wire n tape it to thw white one
47 questions posted
Usually answered in minutes!
886 Questions
666 Questions
541 Questions
485 Questions
500 Questions
