Hotpoint Ultima WDM73 Front Load Washer / Dryer "open door wd420" Questions

...that the door is locked. So i can't open it........ If the door will not open normally, then the only solution is to remove the top cover, and force the door open from inside the washer at the ...

door wont open... Any ideas? It happened on our machine. The soloution to this for me was to take the lid off (two screws). Unplugged from mains. I found the connector to the door had vibrated off and

...open the door. Sometimes when it clunks, the door light will go off briefly and if you catch it right you may be able to open the door then. Any ideas as to what the problem could be? Perhaps you are ...

...locked" light was on, but even since it has gone off, the door wont open. Hi from retired Englishman in SW France, Clearly there is a problem with the door lock itself. Sorry- service call! John ...

you will probably need a screwdriver or similar to do do this.You will need to replace the door catch and spring, and possibly the door lock, as it may break when you force the door open. Thank you !

...door will not open ? In some cases switching off and back on again solves it. Otherwise try to run Rinse & Spin cycle again, and if after cycle door will stay locked you'll need to check the door ...

door won't open if you can still see water in the machine, check the drain hose. If there is no blockage or kink, try to drain machine by lowering the drain hose below the machine level. Once the ...

door dose not open after wash and there r no flashing light.Can any1 help plz with thx. The interlock is stuck, you need to get behind the casing to release. this can be done by taking the top off and

Washing machine door will not open? It's a Hotpoint WD420 6kg Washer Dryer Aquarius Unplug it from electric socket to see if that unlocks it.

...door wouldnt open well i moved my machine a little bit and tried to look behind .there was a water hose at the rear of the appliance which got bent somehow .i just opened the bend and the appliance ...