Hotpoint WMA74 Front Load Washer "fallen drum machine" Questions

...drum have fallen out. I Screws for fin inside drum have fallen out. I need to replace the screws. What is the best way to access the exterir of the drum in a Maytag Neptune MD5500? Remove the ...

...drum has fallen down and the rubber gasket is all twisted up. I can't straighten up the gasket. What happened? Sounds like drum suspension gone or top spring/ springs broken check this 1st refit if ...

drum spring has fallen off when moving machine out to put belt back on I put machine on side and drum spring has fallen off can't locate were to put it back. thanks If you look at the opposite side to

...fault. looks like inside drum has fallen away F9 fault. looks like inside drum has fallen away from the rubber skirt. one of the springs has come off - also ck the lower shock - it may have come ...

Drum fallen to one side During a wash machine started making a noise when I stopped it I found the drum had fallen to a side I don't know which model you have, but there are plastic suspension pads ...

drum fallen out of place? The washer drum on the inside of the washer has fallen out of place in the back. Almost like it ha dropped down. What part would this be ? You have a bearing problem and best

...model rtw4641bq1 drum has fallen about 2 inches and the top of the drum is able to hit the sides of the cabinet. Nothing looks broken in the suspension Bearing issue or broken drum isolation

drum fails to rotate at all though its perfectly free to move by hand, at one point all the lights were flashing above the control switch' this exactly describes the problem I have. The only thing

...DRUM HAVE FALLEN A BIT the trunnion (spider) behind the silver drum has corroded and broken away from the drum,you will need to purchase a new drum and trunnion and remove the front of the machine to ...

...drum has fallen 4 inches and makes loud noises during operation Depending on age, possibly time for a new one. There are fixes in the link. ...