Question about AEG Washing Machines
...Transit Bolts that stop damage during transit MUST be removed before operating the machine. Where are they located? What is the location of the Transit Bolts so that they can vbe removed? read you ...
...transit bolts) you must remove these transit bolts . after you do try it . of course the legs of the washer must be set to make the machine levl. and then make sure the lock nuts on each leg are ...
...transit bolts in our "brand new" zanussi washing machine and am afraid to use it as I do not know what damage might have been done. Highly unlikely any damage will have been done so long as it hasnt ...
...transit bolts have been removed and the machine is on an even surface. What now? FIRST OF ALL THE PERSON WHO INSTALLED THE MACHINE SHOULD HAVE REMOVED THE TRANSIT BOLTS YOU MAY BE LUCKY THAT ONE OF ...
...transit bolts are still in to find out how to remove look in manual. The way you described it sounds like the transit bolts are still in and need to be removed. if the bolts are out the machine need ...
Question about Hotpoint Washing Machines
transit stablisers have not been removed. how do i remove them ? like a regular bolt basicly there long. as far as the plasic peice do not remove the bolt commpletly from that becaus you will need the
Question about Amana Washing Machines
...out of balance you should not really have damaged anything. The transit bolts are there to stop the drum from banging around during transit and unless they have torn free or have bent you should be ...
...transit bolts not removed. also can be caused by motor not winding up gradually into spin - usually a motor tach fault. most likely cause is transit bolts inbalnced load will cause it to shake also ...
...transit bolts have not been taken out although i always thought they held it solid. Where are they located? Hiya .. the transit bolts are located under the lid at either side ..or at the rear... they ...
transit bolts from the back of the machine, which I did, including the washer. There are now black rubber plugs with white hard plastic inside still in place. I am not clear whether to remove these as
183 questions posted
Usually answered in minutes!
886 Questions
666 Questions
541 Questions
485 Questions
500 Questions