...phone to a Wireless provider to replace the SIM card or the phone as needed.I hope this helps.Cindy Wells It means your sim card is not working or sim stand where is your sim inserted is become
...need to call Vodafone to get the PUK. The PIN and PUK are related to the SIM card, not to the phone. If you replace the SIM card with a different one, then the phone will not ask for the PUK
...sim card is in the phone. Hi the first thing you need to check is if that sim card was working in the phone before if it was then ill discuss further at the end of this, if how ever it is not the ...
Question about Motorola Mobility RAZR Cell Phones
...sim card you may try doing a sim card swap to see if the issue is with the device or the sim card. Some times when a sim is going bad you will get odd messages. If the issue follows the sim then it ...
Question about Motorola Mobility RAZR Cell Phones
...BY DOGY the small gold contacts cannot be touching the sim card correctly use a small pin to **GENTLY** raise the pins and wipe the sim card with alcohol replace it into the phone and it should
Question about Motorola Mobility RAZR Cell Phones
replace my old dark blue sim card but can it be activated don't want to lose my plan Assuming the SIM cards are the same size and shape, you shouldn't have any problem. However, for a RAZR 3Vm, we may
Question about Motorola Mobility RAZR Cell Phones
can do about it, you can buy premium assistance and you will get this same response. There is no other solution. You have to contact the phone service provider of that SIM card or replace the sim card
...replace the SIM card , or you call phone provider that issued the sim cadr (eg. At&T, Virgin, Tmobile , Vodafone, Telecom etc.) PUK means "personal unlocking key" . The PUK code is asked if you enter ...
Replace a sim card Hi, how do i replace a sim card in the Motorola RAZR V3m ? 10x Replacing the Sim Card on a Motorola RAZR On the back of the phone you should see grooves for you to slide off like ...
...replace..else the Sim card connector is damaged you have to solder or replace it.If you don't have any hands on,take it to nearest service center. Please do rate the solution if the issue is resolved ...
9,393 questions posted
Usually answered in minutes!
2,201 Questions
884 Questions
756 Questions
626 Questions
431 Questions