Hotpoint WMA58 Front Load Washer "unable open washing machine door" Questions

...unable to open door. I am unable to unlock the door althought the door lock light has gone out and have my babies washing in the machine. We have done another spin and pumped out the washing machine ...

...the machine it gives an error message E42. Unable to open door or get the machine to start washing. sounds like door lock is faulty e42 is saying door is still open. could be wiring to door lock

...unable to open door after wash. Turned dial, on left top of machine, to OPEN DOOR position,no luck. Dial on right at '0' setting, cannot turn it to any other position. HELP! This is normal on most ...

unable to lock the door after you closed it. Open and close the door tightly, then restart the washing cycle. Door lock monitor switch in door lock mechanism unable to communicate to control board the

unable to open the door. Martha, Try running another cycle, for some reason I think machine is sensing it still has water in it. If after running another cycle dose'nt do it, check links below to see

UNABLE TO OPEN DOOR AFTER WASH Remove the top cover, and release the door catch from inside the washer, you will probably need a screwdriver or similar to do do this. You will need to replace the door

unable to open door machine did not rotate during wash or spin and now I cannot get door to open. I suspect brushes in motor need replacing. Usually this type of problem is in the door switch. If you ...

...unable to open the door at the end of a normal washing cycle. The door open button lights up but the door has been blocked for hours now. can you help me please? Try to unplug the unit for 10 to 15 ...

...unable to open the door. On top of this i am currently in China so the instruction manual is all in chinese even though the machine iteself has english displays. I have this exact problem!!! Did ...

...unable to close door came home to an open door and the machine still on. the latch is locked and unable to lock the door is there water in the machine if so you need to clean your pump there is a ...