Hotpoint Aquarius WMA42 Front Load Washer "drain plug" Questions

...drain plug,, unscrew the drain plug counter-clockwise and let the water drain out,,remove the plug totally from the machine and remove anything that is in the catch screen and in the drain hose. ...

...drain plug,, unscrew the drain plug counter-clockwise and drain and remove the plug and screen. clean out any socks or whatever else found its way down there. put plug back in and start wash cycle,, ...

drain plug right away. Get a shallow pan and place under the drain plug to catch the water that is still in there. Twist the plug off and drain 2-3 cups of water in there and remove all the junk. This

...E01 codes keep coming on in mid cycle and shutting down the cycle F09/E01 are related codes. LONG DRAIN: If the drain time exceeds 8 minutes without reaching reset level in pressure sensor, the ...

my machine is going through a wash cycle and has stopped with a "drainage blocked" light Look for a kinked drain hose. Make sure drain hose is not plugged. Remove drain hose from washer and inspect ...

...drain plug. Have a bucket and some towels handy, unscrew the drain plug, ours is right there when take the cover off and its white. Unscrew it slowly, water will most likely start draining. Our drain ...

...drain plug out there should be a filter attached and you will find that a sock or something is plugging it up and not letting it drain. There is a chance the pump motor is bad but usually it is ...

lg washer drain hose is plugged with sand drain hose is plugged with sand I used an old wire hanger and stuck it into the drain hose to create a pathway for the water to drain. Once it started ...

My washer lg wd-3245rhd will not drain, not even from the manual hose close to pump filter. You have 2 problems. The manual drain hose is plugged with debris and cannot drain out. You will have to ...

...300 and it does drain and spin. And I screwed the plug back in tight and it is now leaking water around the drain plug???? Is there a rubber gasket around plug? If so you might need to replace