Hotpoint Aquarius WMA42 Front Load Washer "bang spin cycle stopped" Questions

Ad

...spin cycle extreme vibration and loud bang when it stops There is extreme vibration during spin cycle- redistributing clothes does not help. When spin cycle is finished or when I turn off there is a ...

Ad

Question about GE Washing Machines

1 Answer

...bang thru an entire spin cycle could result in actual damage to the machine. some of the new machines auto shut off at an imbalance so u can correct the problem. think of spinning a top. u unevenly ...

Ad

Question about Whirlpool Washing Machines

1 Answer

spin cycle, it makes a banging noice, rythmic, about 2 per second....only on the spin cycle... can you help??? The spin cycle is used to rid the water by centrifugal force. As the tub spins, the water

...spin drying, but is being applied overly hard, which causes the drum to "BANG", stop abruptly by the brake.  Only a washer repairman could deal with that problem, but, it's NOT dangerous to ...

Question about Hotpoint Washing Machines

1 Answer

...spin cycle washer made a really load noise like something banging on inside of cabinet stopped cycle & redistributed clothes still sounds like really off balance with a lot of banging noise old duets ...

Question about Whirlpool Washing Machines

1 Answer

...spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if ...

...spin cycles our washing machine gets to the rinse cycle and makes a banging noise like it is unbalanced and stops. Even when there is nothing in the machine it does this! HELP! Your Aquasmart machine ...

spin cycle out of control shakes all over bangs on inside of washer it is level Replace all four struts 1st make sure all four feet on bottom have equal pressure on them , then this machine if made ...

Question about Kenmore Washing Machines

1 Answer

...bang then spin stopped the washer was in the rinse, spin cycle and then a loud bang...everything came to a stop and the washer was 'humming' until I pulled out the dial to stop the action. Pushed the ...

Question about Hotpoint Washing Machines

1 Answer

will spin empty but after half load ...stops Any error codes with the fail to spin? Is the wash Tub banging around in Spin Cycle of the Wash Cycle?

Not finding what you are looking for?
Hotpoint Aquarius WMA42 Front Load Washer Logo

669 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...