Hotpoint WMA48 Front Load Washer "motor brush located" Questions

Ad

Question about Indesit Washing Machines

1 Answer

...located inside the motor. Remove rear panel of washer, remove drive belt, from motor and drum, unplug the motor, undo screws that secure motor, and remove motor. At the opposite end to the motor ...

Ad

Question about Bosch Washing Machines

1 Answer

...the other hand no brushes then you would need to fit a new motor. On the bosch the brushes can be hidden look at the back of the motor ,you will see two wires one for each brush connected. Good

Ad

Question about Whirlpool Washing Machines

1 Answer

...motor which is located at the rear of the machine sitting just under the wash unit. You will need a 10mm spanner to remove the bolts holding the motor on. unclip the wiring to the motor and remove. ...

Question about Hotpoint Washing Machines

1 Answer

...motor is located at the bottom rear of the washer. Remove lower rear panel, unplug lead into motor,, remove earth wire. Remove 2 bolts holding motor to drum, lever motor away from you to remove. ...

...of washer, locate and remove belt. Unfasten motor ,disconnet motor lead, and remove motor. Brushes are located at opp end to motor pulley. Replace if less than 5mm long. Plz rate my solution. ...

Question about Zanussi Washing Machines

1 Answer

located? Thanks Andy motor brushes can be replaced in situ but you will find it easier to remove the motor. take the rear cabinet half off and undo electrical connections to motor. motor is held in by

...located on an asko washing machine ??? I'm fairly handy, can I replace myself ??? hi, I used to fix asko's when I was as work and found the motor brushes really easy to fix on the older ...

Question about Hotpoint Washing Machines

2 Answers

www.washerhelp.co.uk/spare-parts-shop/hotpoint-carbon-brushes-faq.html the carbon brushes are located on the motor, you will need to remove the belt and remove the motor to replace the carbon brushes

Question about Bosch Washing Machines

1 Answer

...motor pull motor to rear of machine revome motor to bench locate brush housings undo retaining clip and slide out old brush fit new brush replete with other brush reasonable in reverse of ...

Question about Bosch Washing Machines

1 Answer

...a short handle posi screw drive to remove the brushes from the motor and disconnect the the little wire wire from the end of the brush and remove and replace its that simple hope that helps ...

Not finding what you are looking for?
Hotpoint WMA48 Front Load Washer Logo

58 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3807 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...