...NOTE: The CCU is the Main Computer located directly behind the wash tub. - Check to make sure the dispenser motor is running. In order to see all of this you will need to remove the top panel of the ...
...NOTE: If you fail to press "Hold to Start" within 5 minutes, the washer will shut off. All these instructions begin on page 11 of the owner's manual. If you need a replacement manual, go to ...
post back with your complete model number (located on a nameplate along the wash tub opening under the lid) and let me know. I hope this helps you. NOTE: DO NOT overtighten the agitator bolt. This can
...post cap locate the air gap plastic cap (if equipped) and remove. 3. Remove the center bolt of the agitator. You will have either a 7/16? hex bolt or a recessed square plastic nut. If you have the ...
Question about Kenmore Washing Machines
...post cap. Remove the cap and locate the agitator bolt. Using a socket and ratchet, hold the agitator still with one hand and loosen with other. The upper portion (called the auger) should lift off, ...
...NOTE: When reinstalling top panel, make sure you lay panel on top of washer, leaving a couple of inches of room from the front panel. Then, slide panel towards you (front of washer) so that the top ...
NOTE: Using too much detergent is probably not related to this problem. Usually you get a "SUD" detect error on the display and you will have to run several RINSE/SPIN cycles to get the error to clear
...post. thanks. I've been looking too. And finally found it! john_in_erie Rank: Apprentice Rating: 98%, 12 votes Replacing gasket is fairly simple - need 2 people. UNPLUG FIRST - 1. Remove the plastic ...
...dispenser, if equipped) by either pulling straight up or gently placing a flat blade screwdriver into a slot located in the cap. 2. If the agitator is equipped with an inner cap with a handle, remove ...
...post. NOTE: Sometimes these agitators will stick due to years of detergent accumulation. You may have to wobble it back and forth to get it loose. If you have questions, please let me know. I hope ...
153 questions posted
Usually answered in minutes!
886 Questions
666 Questions
541 Questions
485 Questions
500 Questions