Question about HP Computers & Internet
...GND, GND, 12V, 12V). What could be causing the screen to remain black? check if your signal cable is properly connected to your system unit and make sure that non of the pins of your signal cable is ...
Question about Planar Computers & Internet
...12V, GND, ...)? I miss the power adapter and want to replace it with one of my owen, but I do not know how the pins between Power adapter and monitor are connected, e.g. at which pin is +12V, which ...
...GND > > 5V I 12V > > 5V ^ 12V > > > >For clarification - the male will be the end of your cable, and not the socket on the monitor. >The I is the central polarising bar of the connector, and the ^ is ...
...Looking at the end of the connector clockwise from 1-oclock position: 1pm:NC 3pm:+12 5pm: no pin 7pm:+5V 9pm:+5V 11pm:GND shield is GND +5V@3A +12V@1.5A (you can modify an Apple ADB cable to
Question about HP Computers & Internet
...12v/2.5A, what type of connector is this and what is the color coding for the 4 pin connector? Dhen: This monitor uses a special Power Adapter as shown... Also the Pin designation is from the NOTCHED ...
...12v GND 5v BL GND I tested the 12v line which is supplied from a 7812A transistor and from this all im getting is 4.3v and this is even with the monitor turned on and the video cable wired up to the ...
...gnd 5v gnd 12v) and I had no voltage as a matter of fact everything was grounded. Should I always have voltage at those points or only when the power button is pushed. (Oh Yea no led when plugged in ...
6 questions posted
Usually answered in minutes!
5,069 Questions
2,066 Questions
1,757 Questions
1,195 Questions
1,096 Questions