Hotpoint NWXR473EV Dryer "aquarius ctd00 heating" Questions

...aquarius CTD00 dryer hi my condenser dryer will not heat up i have recently replaced the compacitor because the drum would not turn thats working fine but now the machine will not heat up and i have ...

dryer revolves but no heat on any settings . hotpoint aquarius tumble dryer CTD00 7Kg. fixed using posted advice on resetting thermostat. Many thanks

...Aquarius CTD00 Is there a safety trip on this machine as the heater element has stopped maybe over heated. Can someone please inform me where the trip is located. Many thanks On the heater there will ...

..., i have checked the plug and that looks fine . please help , thanks clare it is a hotpoint aquarius ctd00 dryer condenser your heating element is the most likely cause of this. will need ...

...aquarius ctd00 Sorry, I am not familiar with that model. Remove large panel from rear of machine this contains heating element and two sensors. If machine not heating disconnect sensors and test for ...

aquarius ctd00 no heat, but heater element appears ok Generally speaking, it is usually the thermostat/s that are the cause of the problem. These are located on the top above the heater, or behind the

...aquarius condenser dryer ctd00 - empty water light will not extinguish after water has been emptied resulting in no heat The float switch within the plastic unit at base of machine has failed,shorted ...

...Aquarius CTD00, the drum turns etc but there is no hot air. Have had a look at the elements behind the panel at the back but they seem ok. Best Regards Stuart To be certain whether it is the element ...

...aquarius CTD00 Common faults - 1 The heating elements can fail (meaning open circuit) 2 There are cut-outs (T.O.C's) that might need resetting 3 The thermostats (stats) can trip out or burn out ...

...Aquarius CTD00 Hi, If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly. if ...