HP mx705 17" CRT Monitor "cpu mother board cabling" Questions

...mother board and cpu socket with vackume . once check processor to other computer, if ok then check graphic card . if not solve. then repair mother board it will 100 % solve the problem other wise ...

AND tighten the screw on the cable. (Mine was loose at the CPU) . If that doesn't work try a different VGA cable. If that doesn't work chack the video card is secure in the mother board is applicable

...CPU/Computer that's whystays on screen for so long.1st step check the IDE cable connection form the mother board to Hard Drive and 2nd check the memory or check all hardware`s.Good Luck and Have a ...

cpu processor" . The issue that you are facing mostly happens because of the loose connection of the video cable, if it doesn't fix the problem then the problem is with the graphics card or the mother

...mother board..see with a debug card for mb error..may b short..look for defective capacitors(esp above 1000mfd)/mosfets..go through the mb's south bridge n the circuit lie around atx connector..the ...

...CPU? Please help!!! :( Does your PC has plugged in video card, you can try reseating it first? If it has integrated video card in the mother board, then there may be not much you can do. Did you ...

...CPU Heat Sink *** fan..resit/fit it tightly in position.. 8)on main/mother board..see with a debug card for mb error..may b short..look for defective capacitors(espabove1000mfd)/mosfets..go through ...

...cpu is open and smps power suply in mother board in socket is check and in board in out of rem and cleaning and restore in press in this plase and monitor cable to cpu add socket is press and monitor ...

...CPU Heat Sink *** fan..resit/fit it tightly in position.. 8)on main/mother board..see with a debug card for mb error..may b short..look for defective capacitors(espabove1000mfd)/mosfets..go through ...

...cpu fan and all related dust off the mother board air or vacuum gently,make sure that the memory or dim 1 and dim 2 are in properly by removing cleaning and putting back gently. then put all cables ...