...RCA cable? Hi there, i have a JVC CD car stereo (kd-s731r, non multichanger compatible) and would like to connect my ipod to it to have ipod music through the car speakers. On technical advice from ...
...Connect the RCA audio connectors into the "AUX" inputs of your aftermarket head unit. 3) Tap the red "pigtail" wire into the "accessory" lead of the vehicle radio harness (also usually red). 4) Tap ...
...high inputs. If it does not then you will need to buy an accessory that will allow you to connect speakers and have rca outputs. From there yo will need two sets of rca jacks to run to the
...connect speaker wiring for car to speaker wire side. plug the rca's into the amp ground the ground wire. run a live from the battery to the power on the crossover and run the remote wire to the blue ...
...frequency converter from radioshack/motorworld/halfords. it will splice into ur existing speaker connections and give you rca ...
Question about Scosche Industries Car Audio & Video
rca input yet the fai-3a has 2 left and 2 right outputs what do i do the 2 left and right dont matter, it only matters when ur hooking up a 4 channel amp. all u do is connect one of the channels to it
...enough to run the sub 2) The amp is not properly grounded or powered 3) Remote Sensor wire is not connected 4) RCA Cables or Hi - input sensors are not connected Check out the installation to
Question about Pioneer Car Audio & Video
...rca wires and fuses are good whats next I had a problem with my sub n amp i wiggled the audio input wires and out goes the radio checked out the fuses there all good check the connection of ground on ...
RCA and connect the positive the + input wire on the amp and the negative to the negative input wire on the amp. If you dont know whats positive or negative just go ahead and connect it and experiment
7 questions posted
Usually answered in minutes!
174 Questions
102 Questions
72 Questions
42 Questions
48 Questions