ViewSonic E70fb (Black) 17 in.CRT Conventional Monitor "power new monitor" Questions

...I check power to the monitor,, no problem. I purchased a new AOC monitor to replace it,, no problems with the new monitor. cap in the power supply went bad radio shack 1.24 cents and about 30 ...

...new one. It's probably your dc power supply. Mine would blank just 2-3 seconds after power-on. I pulled this monitor out of the garbage - someone threw it away. I found any old 12vdc power supply I ...

...a desk lamp to check power source issues. (this step is in the op guide with new mon) if you have power coming in , then the monitor is bad. some monitors use and external power pack, try a new

...(very expensive, more than a new monitor) or if you have electronic tools, found and replace that condensator.(cheaper way...) or Have you connected your monitor with a new power cord ? Best

power light stays on continiously This indicates either a problem with the monitor cable(ie shorted) or the display adapter. Try plugging the monitor into a different computer and if it works you will

...Power core is tested and good. I bought it new two years ago. It was fine this morning until the power to the house was out. When the power to the house was back on, the monitor is jusl like dead. ...

...power cord and a different cable) the same problem occurred. That tells me the problem is with the monitor. Model No. : X221W Version X221W sd Mfg Mar 2007 probably needs new voltage regulator for ...

...goes black. let it cool down, unplugged and pluged, powered down...any thoughts Worked fine until now. you need a new power inverter, better yet a new monitor. I have the same monitor as my

...? Try 1. Using a new power cord ( maybe something is wrong with it) 2. Plugging it into a new socket on the wall. If you can't get power to the monitor at all you may be in for buying a new

...manufacture of the monitor and they should have a troubleshooting section or in your manual there may be a number that u can call.. my new dell monitor i had to hold the power button in for 30 ...