Panasonic NV-MD9000EN Mini DV Digital Camcorder "pulse" Questions

Hi... Anyone out there had "pumping/pulsing" Hi... Anyone out there had "pumping/pulsing" clip/video problems with your PMW-EX3?? Just bought (Sept. 2012) a new PMW EX3... sent it back for repair and ...

...beneath with is normally an opto-coupler or a magnetic sensor. when the reel moves it produces pulses that is needed to keep the processor asking the motor to work. A failure of the reel will ...

...are engaged with each other, the tape is not wound because of overload to the mechanism. 3. No FG pulse is output from the reel sensor. 4. No power is supplied to the reel sensor. 5. Tape transport ...

...are engaged with each other, the tape is not wound because of overload to the mechanism. 3. No FG pulse is output from the reel sensor. 4. No power is supplied to the reel sensor. 5. Tape transport ...

...are engaged with each other, the tape is not wound because of overload to the mechanism. 3. No FG pulse is output from the reel sensor. 4. No power is supplied to the reel sensor. 5. Tape transport ...

Samsung SCL860 Camcorder playing tapes in double-speed. Help! I would check to see if the correct sync pulses are getting to the servo processor firstly.

...disk are engaged witheach other, the tape is not wound because of overloadto the mechanism.3. No FG pulse is output from the reel sensor.4. No power is supplied to the reel sensor.5. Tape transport ...

...does this mean!? Error C:31:22 means problem means that System Control is not getting Take-up Reel pulse. This can be electronic or mechanical problem in camcorder. Qualified camera tech will fix it ...

...WONT EJECT TAPE. Your capstan motor has a problem, could be stucked-up or sensor fails. No capstan pulse detected.You may check capstan supply and drive as well. Good ...

...information. The error you listed is a T reel fault, caused by the microprocessor not receiving pulses from the takeup reel on the mechanism. There are several things that can cause this: a bad ...