Roland DR-80C Microphone "condenser mic" Questions

...condenser mic by placing a multitester to the two connectors of the mic with one wire from the mic desoldered. if there's a continuity, then its good. if there's no continuity the mic condenser is ...

...condenser mic to work with mixcraft only dynamic w cant some body pls helpm Condenser microphones need phantom power (48V) to operate. Some condenser mics use batteries to work and get around using ...

...etc.). The mic has been reduced to a kids plastic toy mic! Could it be condensation? This is typical component failure. The mic will require professional service. Condenser Microphone Mod ...

...preamp is not working correctely. condenser microphone voltage is very low or mic is fault . check your microphone cable . preamplifer of condenser mic may be leaking .check ur mic driver and audio

the program to detect my mic as the input to do voice recordings? A condenser mic. requires "phantom power" usually supplied by a mixing desk. Without this, there will be no output signal from the mic

...condenser microphone would this be a good mic for a group of four singers. does it have to have phantom power It would be a good mic for that. It does require phantom power, like alomst all condenser ...

... it's plugged in, the recording software is set to line in. how do i adjust the mic settings? If you are using a condenser microphone, it's need phantom power (48v) to activate the mic. Hope this ...

...condenser is plugged into the Mic/Line input. (Input 1 on the back of the mbox mini). All condenser mics require phantom power, so engage the +48V switch. Also make sure the DI (direct input) switch ...

...mic, we can't do much to help... HOWEVER many of the mics are "condenser" mics that REQUIRE "Phantom" power from a mixer or preamp. These will NOT work without the phantom power being supplied. Look ...