Dell E173FP 17" LCD Monitor "switch auto adjust" Questions

worthless for info. got any suggestions? Try wiggling the auto adjust button on the front of the monitor, it sounds like the button is jammed against the switch causing it to auto adjust over and over

...stuck or the internal switch may be defective. Try pressing the Auto switch firmly 10-15 times,If monitor works now the switch is defective and needs replacement. Do rate the solution. ...

...would not change I have tried to to overwrite this manually but it would not allow me to. I tried switching it off and on, but the computer starts up then this "message in a blue box "Auto ...

...Auto adjust in progress shows on screen and then screen is fine but returns to colour changing when computer is switched off The screen colour changing is apparently an auto test procedure on the ...

auto adjust display settings press d only botton untill menu pop ups than press d only button it switches to other option when it is on auto leave the button and press it quickli again untill its auto

Auto Adjust box keeps appearing Just today the syncmaster 174v monitor I had has had the same message appear repeatedly. The auto adjust box keeps appearing and runs through 100 percent, the screen ...

switch on shifted to left, and other times shifted to right 10 pixels or so. I pressed "auto" to centre it each time it was out. Came back from holidays and now it is left 20 pixels and will not "auto

...auto adjustment being locked! You will use thin flat blade screw driver to crack open the case, some will start at the bottom edge first, some will be from the top bezel, please see my SAMSUNG albums ...

...auto adjusting every second or so. I have tigthened, loosened, changed cable, etc. but still having problems It sounds as though the autoadjust button (switch) has stuck. Try tapping it a few times ...

...auto adjust in progress A black box that says "auto adjust in progress" blinks now and then on my screen. The monitor has already been adjusted to the factory settings. Please help. Thanks, John The ...