...tell? You need to open the unit and do a visual on the boards for the little "can" units with a K X or other imprint/crimp in the bare metal top. The case of them is made with this crimp or precut to ...
Our monitor will not stay on.. "sleep mode" it tells us to.. " move mouse, press any key" It will not stay on... help? The on screen messages are generated by your PC, nto the monitor, if the screen ...
Question about Dell UltraSharp Computers & Internet
...blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed SAMSUNG ...
...blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed ACER ...
Question about Proview Computers & Internet
...tell me how to solve this issue.. Magnet does not affect the LCD panel like the CRT monitor because LCD dose not use electron beams for display function. Most common failures in the LCD monitors are ...
Question about Dell UltraSharp Computers & Internet
...tell you what is wrong with it, free here), it can be as simple as $10~15 worth of caps. If you are going to DIY and have proper tools and know safety precaution then please read on: Most common ...
...tell me the solution. Look for bad caps in the power supply. If you are going to DIY and have proper tools and know safety precaution then please read on: Most common failures in the LCD monitors are ...
Question about Dell UltraSharp Computers & Internet
...tell you how to estimate the lamp length. Are you sure that the lamps are bad, not the inverter circuits? Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in ...
...tell me if the inverter is bad? Model # MG19R8 Thanks Joe I would check the caps in the power supply first, it sounds like unstable DC voltages. If you are going to DIY and have proper tools and know ...
Question about Dell UltraSharp Computers & Internet
...tell me what can i do It can be bad caps, transistors, cold solder joints, bad lamps, etc. You need to open it up and do the visual inspection and voltages checking. If you are going to DIY and have ...
109 questions posted
Usually answered in minutes!
101 Questions
96 Questions
77 Questions
74 Questions
70 Questions
