Dell UltraSharp 2405FPW 24" Flat Panel LCD Monitor "remote monitor switch" Questions

...remote control 8/ Looks more like the tact switches inside the unit are history and have to be replaced. The switches are relatively cheap $2-$3 each, but replacing them inside the monitor needs some ...

...Regards change capasitor(all of them)!! I would take the batteries out of the remote and try turning the monitor on manually. Sometimes when the batteries get old it will do what you are

...remote Turn on the monitor. The only reason that method works at all is that some monitors auto detect which input actually has a signal on it. You can buy switching boxes also if you don't mind ...

multi xv29 plus.lost the remote and my front keys are disabled any way to enable them with out a remote? Let me pull up the .pdf...the DIP switch on the back position 3 set to on to enable front panel

...remote controller commands, and can't even turn off monitor from power switch on its panel. After pulling the power cable, remote control works again (TV signal is still bad). Any thoughts?? try to ...

...Monitor with the same problem. It comes straight on when plugged in, but with the blank screen and scrolling version number across the top. The solution: 1. Use the remote control (check batteries ...

...my samsung tv the video appears in black and white. How do I rectify this? in this case it would seem you are watching in nstc you need to switch the unit to pal using your remote switch the bbc to ...

...remote or the switch on the monitor. It is sound only and and is on for only about 15 seconds before switching off again. I have even tried muting the sound or turning the volume down to minimum, but ...

...remote, you press the button to select the channel....well the switches on the monitor are the same. Behind the switch is a rubber contact which has a conductive contact which you must not clean( as ...

... I have the same problem, the monitor has power, but i can't even switch sources, the front panel is locked and i can't tell if it responds to the remote because there is no menu or picture of any ...