...red blue and green have appeared on the screen of my 1907PFt monitor. They are there even if not connected to my PC I have tried auto correcting the colours through the menu but without success. It ...
Question about Dell UltraSharp Computers & Internet
...monitor, I get this box that says... 2:Digital Input Self Test Feature Check and it has colors, red, green, blue and white and when it's hooked to my PC it just shows that box, do you know what that ...
Question about Dell UltraSharp Computers & Internet
RED/GREEN/BLUE self test image that moves around. this is not a pc problem... this is because the connection loss between pc and monitor... not all pc's have sleep mode in externa vga connection..
...red 43 green and 37 blue. Adjust proportionately upward until you get what you want. Another possibility is to use a different connector cable if your laptop has that option, since your monitor an ...
Question about Dell UltraSharp Computers & Internet
...red, green, and blue), which is the self-test feature of the monitor. If you can see all three colors, the monitor itself is probably OK, and it will mean that you need to check the connector on the ...
...monitor receives mechanical shoks or even just like out of nowhere if the copper contacts become oxidised. This is NOT a dead pixel related problem because the pixel form a matrix made out of 3 ...
...Monitor ID Bit 2 5 Gnd Ground 6 RGND Red Ground 7 GGND Green Ground 8 BGND Blue Ground 9 KEY Key (No pin) 10 SGND Sync Ground 11 ID0 IN Monitor ID Bit 0 GND=Color; NC=MonoMonitor ID Bit 0 12 ID1 or ...
...monitor..... red does not exist any more. I have gone back to the factory reset but to no avail. I have also tried to bring up the red using the monitor adjustment buttons located under the monitor ...
Question about Dell UltraSharp Computers & Internet
...monitor sync master 753 vga connector broken, what is color scheme for new connector Hi, Colour scheme to re wire is as follows... Pin Name Function 1 23 45 67 89 10 11 12 13 14 15 RED GREEN BLUE n/c ...
...monitor are distorted. can you tell me how to reset to defaults -- ie, give me the % that I should set for brightness, contrast, red, blue, green, etc. thanks Brightness-50% Contrast-50% Blue, Green, ...
120 questions posted
Usually answered in minutes!
94 Questions
96 Questions
77 Questions
74 Questions
70 Questions