...switch, old or new, and see if there are numbers on the terminals. If so, just move the wires one at a time, terminal number to terminal number. If you have removed the wires, then you will need to ...
Question about Kenmore Kitchen Ranges
...wiring diagram should be on the range that the switch is going on. That's a Frigidaire part number and they usually put the wiring diagram on back of unit. If not, you can look at the other switches ...
Question about Kitchen Ranges
there a wiring diagram for electric kelvinator cookarama 30 smooth top stove Request the wiring diagram directly from Kelvinator One switch, switching all switches on or off. What could be the problem
...wiring for the front switch appear wrong and the element does not heat properly. Thought we needed a switch, when we went to replace it, it looks like the wires are in the wrong place. Is there some ...
i order a new burn switch, i forgot the wire set up. i need the wiring diagram look on and inside the unit there should be a schematic diagram for the unit that will show you the wiring diagram
...or replace. However you must sure too if the switches are o.k look for some loose wires or faulty wires and repair, or the switch are faulty test with VOM continuity see the diagram. God bless ...
...I need a wire diagram Which switch do you have? Why do you need a diagram. Would you not just change over the wired the way you found them in the first place. Take a photo before you begin to
Question about Maytag Kitchen Ranges
...for out put at switch],[the limiter that you see in wiring diagram is built into the burner and can not be replaced by its self]so if power leaving switch replace burner.hope that helps.God bless ...
need wiring diagram for regulator need a wiring diagram for the front right burner regulator switch. which colored wire goes where on the regulator. there are eight wires Model number?
149 questions posted
Usually answered in minutes!
329 Questions
63 Questions
26 Questions
21 Questions