Hotpoint RGB745 Gas Kitchen Range "oven lights stays low" Questions

...lights oven Yes the ignitor stays on even after the burner is lit. The ignitor is wired in series with the oven valve. It sounds like the oven valve isn't opening all the way. A new ignitor should ...

...oven lights but when I turn up the control knob from low to high the flame stays small therefore the oven tempreture does not increase. Oven is a Rangemaster 110 Its the flame failure device faulty ...

...it is a component called an FSD ( flame safeguard device) 2) If the oven does go to high flame after you have lit it but goes low and stays low then it is the thermostat I hope this helps Steve

...oven starts after 2-3 min and flame very low and thermostat indicator light stays on - replace glow ignitor. Generally, there is an item called a thermocouple which is a safety sensor built into the ...

the stove lights, but the oven is not turning on. if the oven flame is staying on low,you need to replace the FFD.

...oven does light but will only stay on a very low flame whatever the Dial is on or however the length of time, what is wrong with it? Check the burner, the holes where the gas comes out get plugged up ...

...low temp setting, this is annoying and startling every time the oven burner reignites with a loud popping sound. Also, dangerous because gas accumulates.every time it goes off. Sounds like you have a ...

...oven stays low i have tried cleaning jets but this has no effect can you suggest a cause the flame safety device need replacing (FFD)... this lets the full gas through when flame is sensed... safety ...

lights will not stay lit. It is the second front burner from the left. The left oven pilot light goes out from timeto time. You probably have grease that has gotten into the pilot. Turn off the gas to

...oven lights but flame only stays low? What is the likely problem please Is this new and recently converted to LP-Gas? Did you install it and convert it or did you have a professional do it? It sounds ...