Hotpoint RGB745 Gas Kitchen Range "oven change thermocouple" Questions

...change. The purpose of this is to prevent a gas leak (because the oven is turned on) if the flame were to go out and could not be re-lit. Thermocouple Thermocouples What is thermocouple Types of ...

...or bad oven safety valve. you can try change the thermocouple first, if it did not solve the problem, then it will be bad oven safety valve. You can buy thermocouple thru Hardware store. Have

oven burners will not light. This is a common problem that is caused by the thermocouple. I understand that you state that the pilot is running. You should check to see if the pilot's flame is heating

...oven was installed in 1975 when the house was built. Legend has it that the house was built around the stove. You could try a new thermocouple and/or cleaning the pilot assembly. The thermocouple is ...

...Another website says the problem is the thermocouple, wires from it to the EOC, or the Electronic Oven Control itself... http://www.shopyourway.com/questions/1006576 Have a look at this

...thermocouple and the control board. Thanks for your ideas. try changing the oven sensor its in the oven looks like a small rod coming out you need to remove 2 phillip screws the take it out I ...

oven's heat sensor that is specifically the problem. As the safety mechanism (in the control knob) has the most moving parts, it is more likely that this is where the problem will lie as there is more

...oven. Either way, it's unlikely to be a thermocouple problem. If the pilot won't light (I assume the ignition is sparking in the right place) then it's either something inside the pilot jet assembly ...

...oven/elec start glow plug comes on and remains on, gas burner does not light does this thing have a thermocouple ? glow plug functions and burner does not light, do I change out the glow plug or does ...