Nikon Speedlight SB-800 TTL Flash > Search
Nikon Speedlight SB-800 TTL Flash turn head
23 adjust the flash head tWarning indication If the flash head is not adjusted to the horizontal/front position, when the power is turned on, this warning appears on the LCD panel. See page 100 more...
repair. n Problems with the SB-800 Problem The power cannot be turned on. The ready-light does not light up. The power turns off automatically. A strange sound can be heard caused by the flash head zooming back and forth even when the SB-800 is turned off. more...
Turn on flash while pressing some of those buttons with good batteries Try switching from Meter to Standard Mode and move head around. Try move the flash head(flash tube) in Manual mode. It's more...
This data was measured without using the wide-area AF-assist illuminator, zoom-head position adjustment, or LCD panel illumination. The above data flash head zooming back and forth even when the SB-800 is turned off. In this case, replace the SB-800's batteries even if an more...
22 1 Make sure the SB-800 and the camera body are turned off. 2 Rotate the mounting foot lock lever to the left, the lock lever to the right. 3 Hold down the flash head tilting/rotating lock release button to adjust the flash head to the more...
thing you need to do to correct this problem is to turn your flash on, then push and hold the SEL button. A backwards S (see the picture on the swivel part of the head). These two symbols will be one on top of another with more...
to activate or cancel the power zoom function, which adjusts the zoom-head position automatically. OFF : Activated ON : LCD panel illuminator (p. 119) Setting the LCD panel illuminator to turn on or off. ON : Turn on more...
Back to Nikon Speedlight SB-800 TTL... page.
Sponsored Links
Repair Service
Find Flashe Repairman Near You:
= Poor
= Average
= Good
= Excellent
