Gateway FPD 1830 18.1" Flat Panel LCD Monitor "12v smps" Questions

...working fine , then give me the 12V from SMPS. ( black & yellow wires ) if u dont maind u have any electronics knowledge. otherwise u should used adopter. there is any problem please give me the ...

dell 21 inch p1130 no power on check the fuse and cable. check the SMPS out put (100v, 85v, 18v, 12v, etc) Check the Horizontal out put transistor check horz. driver transistor

...fully on display. yes you first check the supply at vertical ic 12v if present then replace that vertical ic if supply is not present then check the regulator ic in smps if faulty then replace ...

...12V to the monitor, but I get no "On" light nor any glow on the screen. Given to me by a friend who had the same problem he was going to junk it but I decided to play with it to see if I could get it ...

...smps viz. 0v (black~ground); +12v (yellow); +5v (red, green~ps-on, violet~pg & grey~sb); -12v (blue); -5v(white); +3.3v(orange).. the 'oscillator and error amplifier ic', or pwm switching ...

...12v to ac). I hope that this info will set you on your way to lighting up your monitor's CCFL's again. Remember this. The inverter gets dc from the main "switch-mode-power-supply" (SMPS) if the smps ...

...12v Whenever strange or weird things start to occur with a cold-cathode-fluorescent-lamp back-lit lcd monitor, I would suspect the culprit to be the SMPS/inverter circuit. Hyundai lcd units have 3 ...

...smps viz. 0v (black~ground); +12v(yellow); +5v (red, green~ps-on, violet~pg& grey~sb); -12v (blue);-5v(white); +3.3v(orange)..the 'oscillator and error amplifier ic',or pwm switching regulator ...

...smps viz. 0v (black~ground); +12v(yellow); +5v (red, green~ps-on, violet~pg& grey~sb); -12v (blue);-5v(white); +3.3v(orange)..the 'oscillator and error amplifier ic',or pwm switching regulator ...

...12v for the inverter circuit which lights-up the 2 cold cathode fluorescent lamps, and +5v for the vga to lcd panel digital signal processing board. One or both of dc rails may be out of regulation ...