tape in to try to watch it, it ejects it immediately after the door closes. What could be causing this? tape sensor bad or bad tape Wow it worked ! After a couple of good swats on the tape side of the
Question about Sony Handycam Video Cameras
tape that would not load and was ejected immediately. What worked for me was to pull out that particular tape and unlocked the reel by using a small screw driver on the square notch on the back of the
Question about Sony Handycam Video Cameras
...tape immediately and check if the tape was damaged or not. If the tape was damaged, avoid playing the part of the tape that have been damaged. You may clean your camcorder's tape head by using a tape ...
Question about Sony Handycam Video Cameras
...immediately resulted in a "normal" ejection. The tape was out of the cassette but could be manually rewound in so all OK up to here. I tried few times using the 4.5 V to verify I could operate the ...
...immediately started beeping and flashing error 31:11 and then 32:11 - cannot eject tape -door won;t even open. Tried all the posted "fixes" about removing batteries, and plugging in, etc. Nothing ...
...tape, then goes back inside the cam' please help thanks hugo when mechanism pops out to eject, wait until it completly comes out, deattache battery immediately, and Pull lever as per below mentioned ...
tape into the camera, it immediately tells me to eject it and flashes "C:31:30" Then the camera will not actually eject unless I switch off the camera, close the side partway and reopen it so the tape
Question about Sony Handycam Video Cameras
...tape, it will be ejected immediately. Then I notice there is one component drops out from the camcorder, and I don't where to put it back. Anyone know what is could be, and where to put it back? I am ...
...immediately goes into a continuous beep and has a "spade"∆ looking icon that faces upwards, flashing continuously. So it appears to involve the electronics panel. Is this something that can be ...
Error C:31:42 I am unable to play any tapes as this error C:31:42 is immediate - along w/ an eject symbol in the middle of the screen. Is this reparable? If so, how and is it something I (novice) can ...
31 questions posted
Usually answered in minutes!
310 Questions
243 Questions
242 Questions
159 Questions
150 Questions