Hotpoint HTS20GCNWW / HTS20GCNCC Top Freezer Refrigerator "bush problems" Questions

Bought Bush fridge freezer 13 months ago. fridge broke down twice with same problem. defrost timer. Can i complain to bush Repaired once . Then broke down again with same problem 5 weeks later,But ...

I have a bush fridge freezer BFFF50152B. There is always water gathering in bottom of fridge compartment which needs mopped out regulary. Bush Fridge Freezer BFFF50152B This is a very common problem ...

Hi, I have Frigidaire side by side doors refrigerator about 5 years old. refrigerator door knocks when when I close the door . Is that adjustment problem or some parts worn out and have to be changed?

problems inside. Room temp is about 65-75 degrees farenheit Kitchen floor damp (grout between tiles wet). I can't really define where the noise is coming from, but it appears to be under or behind the

I have a problem with a bush fridge. Its brand new and water keeps collecting on the top shelf at the back of the fridge and ice droplets form at the top at the back of the fridge Hi, Please ensure ...

Bush ME5585UCL Fridge drip tray is filling with condensate. I have an under counter fridge as above, setting is #3 (recommended). I have had it for a few weeks now. The back of the fridge has a fair ...

intermittent tweeting sound on a profile gss22sgrf tweeting sound like bad bushing from fan There is more than one fan on your refrigerator I think you mean that the bearings and not the bushings are ...

...mount refrig/freezer bought in 3/04. the fan in the freezer is making an awful noise Eventualy, the bushing inside the fan motor because of continious usage will need to be replace , this parts are ...

Frig shutters and makes noise when the cooling cycle shutoff. It is probably caused from one or more of the four rubber bushings that mount your compressor to the refrigerator frame. The bushings wear

The fridge compartment on my Bush model BFFF55152W fridge freezer freezes up presumed thermostat had failed fitted new one same problem. Can you help Put a timer on main supply to test worked ok ...