JVC Cybercam GR-DV800US Mini DV Digital Camcorder "reset e03" Questions

...E03 is displayed and says that the unit is in safeguard mode. I have removed the power source several times, but it has not reset itself. I tried Tapping on side of Camcorder and I worked, after 2 or ...

E03 is Showing up w/msg that states it went into protection mode and I must reset it by removing battery and power for a few minutes. Tried this several times as well as trying to use a radio shack DV

...reset it and I've not had anymore issues SO FAR! Good luck with it. I have the E03 problem and I can't even get the tape out and it clicks all the time PLEASE HELP!!!!!!!! Found another web site ...

...E03 try reseting the camcorder. most electronics go into safe mode when they detect a major problem so nothing else can go wrong. there should be a small pin hole some where that says reset or take ...

E03 error indication. Ejecting and reinsertion of the tape does not seem to be fixing the problem, also says unit in safeguard mode. What do I do to remedy this? where your battery goes in,on the side

...Please help... I can't use my camera.. look for a tiny pinhole and insert a pin while powered up to ...

E03? unable to view or record any footage due to the above being shown in the display? Would you have any advice or suggestions on how to resolve this? Thank you, Remove the battery pack and or unplug

...E03 message and I do not know how to fix it. I have tried eject-reinsert, power off-power on, and battery removed-battery returned. What else should I be doing? Please try a hard reset first as you ...

...E03 error code and the message says to take the tape out and re-insert it. When I take the cassette out the tape is hanging out of it. When there is no tape in the camcorder I get an E06 message ...

...e03 HI MY MIN JVC GR D347 OPT800 RECORDER IS IN SAFE MODE AND I DISLOCATED THE BATTERY AND THE CORD AND ITS STILL IN SAFE MODE IS IT A RESET BUTTON ON IT HIDDIN Is that an old VCR? Hold the play ...